Feedback
Connect:

News & Events

COME SEE THE SWITCHBLADE PROTOTYPE AT AIRVENTURE 2017

COME SEE THE SWITCHBLADE PROTOTYPE AT AIRVENTURE 2017, IN OSHKOSH, WISCONSIN!! July 24-30, 2017 is AirVenture – the world’s biggest aviation celebration! Samson Motors will have our best display ever – the full scale Switchblade prototype, in Outdoor Exhibits BOOTH # 429. We are located near the flightline off Wittman Road, directly behind Honda Jet […]

Read More

Update Page 18 May 2017

  Big, big news is completion of round one of dyno testing the supercharged Samson V4 engine. Our goal was 190 horsepower at 6,000 rpm or less, and our first run on the dyno gave us 193 hp. So of course we had to go up from there! We continued until we achieved repeated runs […]

Read More

Update Page 5_17_2017

It took quite a bit to get the leading arm suspension ready for drop testing, but it is now mounted on the drop test tower, and wired with sensors. The leading arm front suspension went through several iterations to get the steering and shock absorber to be happy in their locations. We have quite a […]

Read More

Switchblade Update 19 April, 2017

We made a list to finish the project!!!! This was huge, as it meant no more “this is what we will do next month”. It meant “we are close to finishing, and this is what it will take to fly.” We have crossed several things off the list, one being the mounting of the brake […]

Read More

SUN ‘N FUN INT’L FLY-IN EXPO 2017

SUN ‘N FUN INT’L FLY-IN EXPO April 4-9, 2017 in Lakeland, Florida Join us at our Samson Motors  Forums! “Switchblade Flying Car: Cabin & Safety Features” Wed. April 5 @ 1:00-1:55pm (CFAA-12) Ken Chatham Sr. & Ken Chatham II, Switchblade Owners & Ambassadors Thus. April 6 @ 11:00-11:55am (CFAA-12) Brian Purdy, Switchblade Owner & Ambassador Sat. April 8 @ 11:00-11:55am (CFAA-12) Mark Safreed, Switchblade Owner & […]

Read More

SWITCHBLADE UPDATE 19 March, 2017

  We had a change in how we approach the leading arm front suspension. Above is an engineering image of our original leading arm, shown curving away behind the front wheel. Having a bent piece of very tough steel proved harder to obtain than we realized, so we changed to a welded series of straight sections, […]

Read More

SWITCHBLADE UPDATE 16 February, 2017

We said we would show you how it looks to sit in a Switchblade, and you can see from the smile on Sam Bousfield’s face in the image above, that he is happy with how that seems. Plenty of head room and legroom, plus storage behind the seats. The tape on the floor indicates the […]

Read More

SWITCHBLADE UPDATE 15 January, 2017

This update will focus on the rear of the Switchblade body, as the last post dealt mainly with the front section of the cabin. Below is shown the rear of the cabin section. The tube frame for the engine is bolted to the rear bulkhead, and the rectangular hole in the upper middle of the […]

Read More

SWITCHBLADE UPDATE 11 January, 2017

  Several days after the body was taken out of the cocoon (jig that held the components in place while all were bonded together), we had another look at the body. Composite Approach builders had done all of the trimming, sanding, and prepping to make the body ready for the next steps of the build […]

Read More

Switchblade Update 7 January, 2017

The Switchblade body was assembled inside what we called ‘the cocoon’, which is a fixture or jig that keeps the skins in perfect position during the bonding process. This has been ongoing for over two weeks, and you may have been following the process. There is a moment of truth that happens, and it begins with […]

Read More
Page 3 of 13«12345»10...Last »

About Samson

Progress Page

Keep up with our recent progress and discoveries, challenges and triumphs.

More >

Featured Video

From construction videos to animations taken from actual flights in the flight simulator.

More >

Recognition

Read what real people think about our vehicles, our company, and our team.

More >

eNewsletter

The inside scoop, breaking news, our next appearance, future plans, and events from the CEO.

More >

Watch

The revolutionary Switchblade™ three-wheeled Flying Motorcycle leads the field as the first of this new vehicle line to meet the growing demand for flying cars and roadable aircraft.

Copyright © 2012 Samson Motorworks